ESP - Electro Static Precipitator
Our Electrostatic Precipitators or ESP’s are specifically designed for commercial kitchen extract systems and have integral sumps to collect the oil, grease and smoke particles filtered out of the exhaust.
This not only simplifies servicing but eradicates potentially dangerous spillage from the bottom of the units and greatly cuts down on buildups of grease within the ducting.
The ionisation voltage has been designed to run at a negative potential which enhances the ionisation of particles and also produces more ozone which helps reduce cooking odours. Our ESP units t in-line with the kitchen ducting and can be configured modularly to cope with all extract volume requirements.
How It Works?!
Electrostatic Precipitator (ESP) Is a method of removing particulate matter from an airflow. This method makes use of a high voltage to separate particulate such as smoke particles from the airflow.
ESP is the most efficient and effective method of filtration, other methods use a filter medium which the air passes through to separate these particles, however, the filter media adds significant extra resistance to the airflow resulting in pressure drop. whereas an Electrostatic Precipitator creates very low or zero resistance to the airflow.
The particulate matter is ionized and trapped using electrically charged plates causing the particles to be attracted towards plates and separated from the airflow.
ESP is the most efficient and effective method of filtration, other methods use a filter medium which the air passes through to separate these particles, however, the filter media adds significant extra resistance to the airflow resulting in pressure drop. whereas an Electrostatic Precipitator creates very low or zero resistance to the airflow.
The particulate matter is ionized and trapped using electrically charged plates causing the particles to be attracted towards plates and separated from the airflow.
Previous
Next
UNI-CLEAN Models Available
UNI-216Q-6K
UNI-CLEAN-
Volume Flow Rate - Up to 1.6m³/s
-
Weight - 140Kg
-
Dimensions 886(H) x 735(W) x 1447(D) mm
-
Power - 860W
-
Number of Cells x 2
-
Cell Dimensions - 600 x 581 x 240mm
-
Input Voltage - 230Vac/1 Phase / 50-60Hz
-
Pressure Drop - 110Pa
.
UNI-216Q-8K
UNI-CLEAN-
Volume Flow Rate - Up to 2.2m³/s
-
Weight - 153Kg
-
Dimensions 943(H) x 735(W) x 1568(D) mm
-
Power - 959W
-
Number of Cells x 2
-
Cell Dimensions - 657 x 642 x 240mm
-
Input Voltage - 230Vac/1 Phase / 50-60Hz
-
Pressure Drop - 110Pa
.
UNI-216Q-10K
UNI-CLEAN-
Volume Flow Rate - Up to 2.8m³/s
-
Weight - 195Kg
-
Dimensions 886(H) x 735(W) x 2030(D) mm
-
Power - 981W
-
Number of Cells x 3
-
Cell Dimensions - 600 x 581 x 240mm
-
Input Voltage - 230Vac/1 Phase / 50-60Hz
-
Pressure Drop - 110Pa
.